10. - Maintenance and storage
FC244/D/-FF/D-FF
117
KN329CGB_A
Mower conditioner
When remounting:
- Position their largest diameters at right angles to
each other.
- Position conical centre of spring washer at the
top.
- Tighten screws:
• Torque: 12 daN m (89 lbf ft).
Check if there is still a gap of 1 mm (0.04’’)
between the disc lower part and the cutterbar
wear plates.
If this is not the case, fit one (maximum two)
spacer(s) between the disc and the mounting
hub.
X
