10. - Maintenance and storage
FC244/D/-FF/D-FF
135
KN329CGB_A
Mower conditioner
To access the limiter flange of the secondary drive
(d):
- Loosen screw (1).
- Pivot and slide guard (2).
- Measure the distance X between the end of bolts
(1) and ends of nuts (2).
- Tighten nuts to release the friction discs.
- Let the friction discs slip for a few seconds
(manually).
- Loosen nuts (1).
• The distance X must be identical to the measured
value.
- Couple the intermediate PTO shaft on the central
gearbox side.
- Reinstall guard cone.
- Reinstall guard.
The friction slip clutch is ready to function.
d
1
2
X
2
1
X
1
