- 32 -
Lift capacity
Max. frontward
Max. rearward
position
position
150 bar
1800 daN
1300 daN
180 bar
2200 daN
1800 daN
Tractor
hydraulic
pressure
In order to reduce combination overhang as much as possible, the 3-point frame lower linkage hooks (A) can be
adjusted horizontally through a range of 22 cm (8,5") (photo 43 on page 31).
Depending upon application, the standard position (as set in factory) can be changed. The alternative positions
can be achieved as follows :
-
towards the rear
: by combining the two rear positions of linkage arm (W) with the four holes (F) of arm (G) (photo
43 on page 31)
-
towards the front
: by first moving rear frame (C) into position (Y) and by combining the two front positions of
linkage arm (W) with the four holes (F) of arm (G) (photo 43 on page 31).
Note
: In the position (Y), the 2 plates (Z) must be removed.
44
