- 26 -
Using 8 bolts (U) and M12 nuts, mount the roller arms (B) together with the covers (D) on the roller bearing housings
(T) placing a spacer (N) as shown on drawings 32 and 33
(torque 10 daNm / 74 ft.lbs)
. Then fit the swinging arms
(A) on roller arms (B) with 6 bolts (C) and M16 nuts using the 3 holes (C)
(torque 22 daNm / 160 ft.lbs)
(fig. 26,
page 23).
Then mount the complete roller assembly with arms (A) on the roller arm brackets (K) by means of 2 pins (X)
secured with 2 self-locking screws (J) (M10 x 16) (photo 23, page 22).
2) SKIDS + STAND
(photos 35 and 35 A)
Kit no 120 9210
35A
35
D) MAXICRUMBLER ROLLER
(photo 34)
2.50 m - Kit no. 121 6950
3.00 m - Kit no. 121 6870
The maxicrumbler roller is ideal for dry or slightly
humid conditions. It is not advisable to use it in
conjunction with an integrated seed drill.
It is made up of fixed tubes (F) welded on round
support rings (photo 34).
The
EL 142
can be equipped with 2 skids which must be mounted on each side of the machine.
This equipment is recommended in Cultirotor version when no roller for working depth control is fitted.
Depth control is adjusted by means of 6 hole skid bars (T) (photo 35).
Assemble skids following photo 34. First remove the wear plate of the lateral housing.
A stand (E) is supplied with the skids to ensure stability when machine is parked (photo 35 A).
32
33
34
