- 36 -
14) SIGNALLING ELEMENTS
Kit no. 120 8840
Install the signalling elements as described below :
- Fix the 4 supports (A) and (B) on the 2 adapter plates (C), at the rear of the right side plate, and on the rear left
plate using 4 bolts (S) (M 16 x 35) and nuts (M 16) (torque 16 daNm) (see photos 47 and 48).
- Fix the four reflector boards (D) onto the four supports (A and B) with 12 bolts (T) (M 10) (torque to 10 daNm
/ 75 ft.lbs) as shown in photos 47 and 48 making sure that the red and white stripes are positioned correctly (the
top outer corners must be red, photos 49 and 50).
- Fit pilot lights (K) to the front reflector boards (see photo 50).
- Fit the left tail light (I) (marked "L" on the connector terminal) to the left rear reflector board (photo 49). The left
tail light's connector terminal is also white.
- Fit the right tail light (M) (marked "R" on the connector terminal) to the rear right reflector board (photo 49).
- Layout the wiring harness referring to photos 47, 48 and 50 and attach it in place with self-sticking collar holders
and clamp collars (O).
NOTES
: - A 7 pin socket is required at the rear of the tractor in order to operate these signalling elements.
47
48
49
50
