background image

AFTER SALES SUPPORT

1300 886 649

[email protected]

AUS

MODEL: GTM-8020   PRODUCT CODE: 52122  12/2015

5

General Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE 

Read this manual thoroughly before first use

, even if you are familiar with this 

type of product. The safety precautions enclosed herein reduce the risk of fire, 
electric shock and injury when correctly adhered to. 

Keep the manual in a safe 

place for future reference

, along with the completed warranty card, purchase 

receipt and carton. If applicable, pass these instructions on to the next owner of 
the appliance.

Always follow basic safety precautions and accident prevention measures 
when using an electrical appliance, including the following: 

 Electrical Safety and Cord Handling

•  Connection:

 Only connect the fully assembled appliance to a readily accessible 

electrical wall outlet, and make sure that your outlet voltage and frequency 
correspond to the voltage stated on the appliance rating label.

•  Protect from moisture:  

Do not place the appliance near a sink or basin so that 

the appliance, the mains plug and the power cord cannot accidentally come into 
contact with water. If the appliance, mains plug or cord falls into water, turn off 
the power immediately. Do not reach into the water!

•   

WARNING: Do not immerse! 

To reduce the risk of electrocution, never operate 

this product with wet hands. Never immerse the device, the mains plug and/or 
the power cord in water or other liquid. 

•  Power cord: 

Do not kink, squash or damage the power cord and protect it 

from sharp edges and heat. Do not let the cord hang over the edge of a table or 
benchtop; do not let it touch hot surfaces. Keep it out of children's reach.

•  Extension cord: 

We recommend you do not use the appliance with an 

extension cord. But if you must use one, make sure it has the same technical 
specifications as the one of the appliance. 

•  Cord handling: 

Unwind the power cord completely for use. The cord as well as 

any extension cord required should be run in such a way that there will be no 
risk of anyone pulling it inadvertently or tripping over it.

•  Damage: 

Do not pick up or operate the appliance if the power supply cord, plug 

or housing is damaged, or after it malfunctions or has been damaged in any 
manner. If the power cord is damaged, it must be replaced by the manufacturer 
or a qualified person in order to avoid a hazard.

 In case of damage, contact 

our after sales support line for advice.

•  RCD: 

Unless your home is already fitted with a residual current device (safety 

switch), we recommend installing an RCD with a rated residual operating 
current not exceeding 30mA to provide additional safety protection when using 
electrical appliances. See your electrician for professional advice.

Summary of Contents for GTM-8020

























Reviews: