Kubota RT120Q Operator'S Manual Download Page 32

Page: 32 / 219

RT120Q Operator’s Manual

Controls - 31

Center Console

Item

Description

Notes

Auxiliary outlet

Provides power for other
equipment.

Power output is 12V, 10A.

Horn button

To sound horn, press.

Start override switch

For engine override, press.

IMPORTANT:

Override starts

interlock functions, allowing operator
to start tractor for a short period of
time to move from a potentially
dangerous position.

Axle lock switch

To lock rear axle, press top.

To unlock rear axle, press
bottom.

NOTICE:

•

To prevent mechanical damage,
stop tractor before operating axle
lock switch.

•

After disengaging axle lock, drive
tractor in reverse 6’ (2 m) to fully
disengage.

c00ic179h.eps

c00ic044h.eps

c00ic024w.eps

Summary of Contents for RT120Q




























































































































































































































Search results

Summary of Contents for RT120Q

Reviews:

Kubota RT120Q, Operator'S Manual, Page: 32 / 219

Search results

Summary of Contents for RT120Q

Reviews: