M1
M9000DT-M, WSM
SPECIFICATIONS
SPECIFICATIONS
NOTE: *Manufacture’s estimate The company reserves the right to change the specifications without notice.
W1028103
Model
M9000DT-M
Standard
With 80 in. wide axle
Engine
Model
V3300-TIE / V3300-TIE2
Type
Vertical, water-cooled, 4-cycle diesel engine
No. of cylinders
4
Total displacement
3318 cm
3
(202.5 cu.in.)
Bore and stroke
98
×
110 mm (3.9
×
4.3 in.)
Net power
67.2 kW (90 HP)*
PTO power (factory observed)
59.7 kW (80 HP)* / 2600 min
-1
(rpm)
Maximum torque
311 N·m (31.7 kgf·m, 229.4 ft-lbs) / 1400 to 1600 min
-1
(rpm)
Battery capacity
12 V, CCA 1000A
Fuel
Diesel fuel No. 1 [below
−
10 °C (14 °F)], Diesel fuel No. 2 [above
−
10 °C (14 °F)]
Fuel tank capacity
90 L (23.8 U.S.gals., 19.8 lmp.gals.)
Engine oil capacity
10.7 L (11.3 U.S.qts., 9.4 lmp.qts.)
Coolant capacity
9.0 L (9.5 U.S.qts., 7.92 lmp.qts.)
Dimensions
Overall length
4060 mm (159.8 in.)
Overall width (Minimum tread)
2010 mm (79.1 in.)
2470 mm (97.2 in.)
Overall height (with ROPS)
2730 mm (107.4 in.)
Wheel base
2250 mm (88.5 in.)
Tread
Front
1565 mm (61.6 in.), 1665 mm (65.6 in.)
1830 mm (72 in.), 1925 mm (75.8 in.),
2025 mm (79.7 in.)
Rear
1525 mm (60.0 in.), 1630 mm (64.2 in.)
1845 mm (72.6 in.), 1940 mm (76.3 in.)
2045 mm (80.6 in.)
Minimum ground clearance
642 mm (25.3 in.) DRIVE CASE
Weight (with ROPS)
3240 kg (7143 lbs)
3320 kg (7319 lbs)
Travelling
system
Standard tire
size
Front
13.6 - 38
Rear
13.6 - 38
Clutch
Single dry plate
Steering
Hydraulic power steering
Transmission
12 forward and 12 reverse fully synchronized main and shuttle transmission with creep
speed
Brake system
Multiple wet disk mechanical
Differential
Bevel gears with diff. lock (Front, Rear)
Hydraulic
system
Hydraulic control system
Position, draft and mix control
Pump capacity
64.3 L (67.9 U.S.qts., 56.6 lmp.qts.)/min.
Three point hitch
Category II
Maximum
lifting force
At lifting
points
2500 kg (5560 lbs) [ 3400 kg (7496 lbs) : with assist cylinder] at lower link end with links
horizontal
24 in.
behind lifting
point
2100 kg (4630 lbs) [2900 kg (6393 lbs) : with assist cylinder]
Remote hydraulic control
One remote valve
System pressure
19.6 MPa (200 kgf/cm
2
, 2846.6 psi)
Traction system
Swinging drawbar, adjustable in direction
PTO
Live PTO
(Indipendent)
Direction of
turning
Clockwise, viewed from tractor rear
Standard
PTO
540 min
-1
(rpm) at 2205 engine min
-1
(rpm)
KiSC issued 04, 2006 A
