M3-S3
M9000DT-M, WSM
TRANSMISSION
Steering Wheel, Meter Panel and Bonnet
1. Remove the steering wheel (1) with a steering wheel puller
(Code No. 07916-5-1090).
2. Remove the shuttle lever grip (2).
3. Remove the meter panel mounting screw and disconnect the
meter cable (4).
4. Disconnect the connectors (6).
5. Disconnect the main switch connector (7) and headlight switch
connector, hazard and turn signal switch connector.
6. Disconnect the engine stop cable (8) at the engine side.
7. Remove the rear bonnet (3).
8. Remove the fuse box (9) and cover (10).
W1011214
Piping for Power Steering
1. Disconnect the turning delivery hoses (2) and (3).
2. Disconnect the main delivery pipe (4).
3. Disconnect the return pipe (1).
4. Remove the steering controller mounting screws.
5. Remove the steering controller.
(When reassembling)
W1011609
Piping for 3-Point Hydraulic System
1. Remove the accelerator rod (1).
2. Remove the suction pipe (3).
3. Remove the delivery pipe (4) for 3-point hydraulic system.
4. Remove the delivery pipe (2) for power steering.
W1011808
(1) Steering Wheel
(2) Shuttle Lever Grip
(3) Rear Bonnet
(4) Meter Cable
(5) Meter Panel
(6) Connectors
(7) Main Switch Connector
(8) Engine Stop Cable
(9) Fuse Box
(10) Cover
Tightening torque
Main delivery pipe and
return pipe retaining nut
46.6 to 51.0 N·m
4.8 to 5.2 kgf·m
34.7 to 37.6 ft-lbs
Turning delivery hose
retaining nut
24.5 to 29.4 N·m
2.5 to 3.0 kgf·m
18.1 to 21.7 ft-lbs
Steering controller
mounting screws
48.1 to 55.9 N·m
4.9 to 5.7 kgf·m
35.4 to 41.2 ft-lbs
(1) Return Pipe
(2) Left Turning Delivery Pipe
(3) Right Turning Delivery Pipe
(4) Main Delivery Pipe
(1) Accelerator Rod
(2) Delivery Pipe
(3) Suction Pipe
(4) Delivery
KiSC issued 04, 2006 A