M3-S6
M9000DT-M, WSM
TRANSMISSION
Center Frame and ROPS
1. Remove the remote valve wire.
2. Remove the draft and position control lever grips (1), (2).
3. Remove the auxiliary speed change lever grip (7).
4. Remove the DT shift lever grip (4).
5. Remove the three point hitch lowering speed control grip (8) and
PTO lever (3).
6. Remove the center frame (6).
7. Remove the ROPS (5).
(When reassembling)
W1013193
Floor Mat and Housing Cover
1. Remove the floor mat (1).
2. Remove the housing cover (2).
W1013600
Pedal Frame
1. Disconnect the brake rods (3) (Right and Left).
2. Disconnect the clutch rod (2).
3. Disconnect the shuttle rod (5).
4. Remove the delivery pipe (4) for PTO clutch.
5. Remove the pedal frame (1) with wire harness.
IMPORTANT
■
• After reassembling the pedal frame, be sure to adjust the
brake pedal travel and clutch pedal free travel.
(When reassembling)
W1013695
Tightening torque
ROPS mounting screw
M16 grade 9 screw
260 to 304 N·m
26.5 to 31.0 kgf·m
192 to 224 ft-lbs
(1) Position Control Lever Grip
(2) Draft Control Lever Grip
(3) PTO Lever
(4) DT Shift Lever Grip
(5) ROPS
(6) Center Frame
(7) Auxiliary Speed Change Lever Grip
(8) Three Point Hitch Lowering Speed
Control Grip
(1) Floor Mat
(2) Housing Cover
Tightening torque
Pedal frame mounting
screw
77.5 to 90.2 N·m
7.9 to 9.2 kgf·m
57.1 to 66.5 ft-lbs
Shuttle rod length A
Factory spec.
268 mm
10.55 in.
(1) Pedal Frame
(2) Clutch Rod
(3) Brake Rod
(4) Delivery Pipe
(5) Shuttle Rod
KiSC issued 04, 2006 A
