KTS-Electronic GmbH & Co. KG
– GOLD SCAN II
21
10.2 Care
Your GOLD SCAN II requires little maintenance, yet there are some items, which you
should consider, in order to receive its optimal readiness for operation. Avoid extreme
temperatures, since it can be possible that electronic construction units are damaged
thereby. Protect the electronic housing with a plastic bag in case you should get
caught by rain, fog or dust. Always keep your equipment clean and dry and wipe off
sand and dirt.
10.3 Legal note
Before you start searching please note that the monument protection as well as other
legal standards are relevant. KTS-Electronic GmbH & Co. KG. assumes no
responsibility for possible legal violations.
In case of doubts we recommend a comprehensive consultation with an attorney or
national monument offices.
11. Contact
KTS-Electronic GmbH & Co. KG
Kurhessen Strasse 1
64546 Moerfelden-Walldorf
Germany
Tel: +49-(0)6105 9111-50
Fax: +49-(0)6105 9111-55
www.kts-electronic.com
eMail: [email protected]
Office hours:
Mondays
– Thursdays:
9:00 am to 4:30 pm
Fridays:
9:00 am to 4:00 pm
Copyright: KTS-Electronic GmbH & Co. KG, Moerfelden-Walldorf/Germany, 2015
The right to reproduction or the disposal of graphics and/or texts of this publication is
without autor’s explicit consent not allowed.
