KTS-Electronic GmbH & Co. KG
– GOLD SCAN II
16
Note:
To ensure a correct measurement, it is absolutely necessary to press the
Reset-
button before every search process and light up of the
Reset
LED.
5.9 Audio output
The sound can be turned on or off. The volume is adjustable in 10% steps from 0 to
100%. Of course, the volume control depends on the individual volume of your PC.
5.10 Scaling
With the support of scaling the presentation in the color spectrum will be adapted
optimally. The lower limit is shown in blue color, the maximum limit appears in red.
The use of scaling is especially recommended for less distinctive color changes.
5.11 Presentation
The measurement data is displayed color-coded and 3-dimensional. Low values
correspond to the color blue, green or yellow are assigned to medium measured
values. High readings are shown in red.
In the data menu you have the option to store measured data resp. display the
measurements again. By pressing the right mouse button the 3-D presentation can
be rotated in all directions. The [0] button leads you back to the origin presentation.
5.12 Storage and transfer of measurement data
For a subsequent analysis the measurement data is stored. We recommend the
further data processing in the undisturbed atmosphere of your home, where perhaps
a larger display is available.
If you want to evaluate the measured data on a larger display later on, transfer it to
the provided USB stick, on which the complete software is pre-installed.
