KTS-Electronic GmbH & Co. KG
– GOLD SCAN II
15
5.4 Adjustment range
All settings are stored and available with the next program start.
5.5 Serial interface
Here you can choose the COM-port for the connection to the measurement
hardware. In this list only the present COM-port will be shown. The number of the
COM-ports can be read out in the Windows Device Manager (s. page 18, 6.2).
5.6 Speed
You may select three levels of measuring speed. The movement on the tracks must
comply with your speed. A switch is also possible with the function keys [F2], [F3]
and [F4].
5.7 Position
The 3D display can be rotated and tilted. The center button [0] resets to the origin
presentation.
5.8 Start / Stop
By pressing the Start button the search begins. The first results will be displayed 2-
dimensional until the measurements are completed. For the next measuring you must
press the start button again. With the button [Stop] you can interrupt the
measurement at any time.
The measuring process starts with a countdown. The figures are accompanied by
short audio signals. After the
Start
display the coil must be moved from left to right.
For this purpose follow the appearing colored lines. After every end of a line the coil
must be slightly moved forward. At the end of the track the audio signal is repeated.
The recording automatically stops after the last track.
