KTS-Electronic GmbH & Co. KG
– GOLD SCAN II
8
The GOLD SCAN II is ready for use within a very short time:
1.
Activate the metal detector with the ON-/OFF-button. The respective searchcoil
should be cable-connected to the electronic unit in advance.
2.
Hold the searchcoil to the ground and press the
Reset
-button for a brief
moment. You herewith attain a zero balance, which is necessary for a trouble-
free search.
Please make sure, that there are no metal objects near the searchcoil during
zero balance. This could cause a wrong adjustment of the metal detector and
produce unwanted indicator effects (as the case may be repeat the
RESET-
procedure on another, metal-free spot).
3.
In the beginning please set the frequency to the lowest level (turn the
Freq
.-
modulator clockwise). The volume should be set hearable with the help of the
Audio
control. Generally we recommend to start with the lowest frequency
adjustment to acquaint yourself with the handling of the device. With advancing
experience it is expedient, to increase the frequency gradually, what will have a
positive effect on the search performance.
3.1 Search recommendations and hints for Reset operation
During the search process be sure that you do not
carry items of metal with you. This
could cause a wrong adjustment when pressing the
Reset
key and can produce false
indicator effects. In addition, this can lead to a false metal discrimination. While
searching be ensured, that the sound remains constant, otherwise a wrong
adjustment caused by magnetic fields may occur. In this case, the searchcoil is held
above the ground and the display has to be observed after renewed actuation of the
Reset
-button and the adjustment of the frequency. The GOLD SCAN II has a
constant metal discrimination. Thereby the inserted microprocessor computes the
conductivity of the metal objects and indicates them on the digital display
Note
: For a successful search the function of the
Reset
-button is of utmost
importance.
