KTR Kupplungstechnik
GmbH
D-48407 Rheine
R O T E X
®
m o u n t i n g
i n s t r u c t i o n s
d e s i g n Z S - D K M a n d Z S - D K M - H
KTR-N
sheet:
edition:
40224 E
7
4
Gezeichnet:
14.07.06 Sha/At
Ersatz für:
Schutzvermerk
ISO 16016 beachten. Geprüft:
07.08.06 Sha
Ersetzt durch:
2 Hints
2.4 General Hints of Danger
STOP
D A N G E R !
With assembly, operation and maintenance of the coupling it has to be made sure that the
entire drive train is protected against unintentional engagement. You can be seriously hurt
by rotating parts. Please make absolutely sure to read through and observe the following
safety instructions.
•
All operations on and with the coupling have to be performed taking into account "safety first".
•
Please make sure to disengage the power pack before you perform your work.
•
Protect the power pack against unintentional engagement, e. g. by providing hints at the place of engagement
or removing the fuse for current supply.
•
Do not touch the operation area of the coupling as long as it is in operation.
•
Please protect the coupling against unintentional touch. Please provide for the necessary protection devices
and caps.
2.5 Proper Use
You may only assemble, operate and maintain the coupling if you
•
carefully read through the mounting instructions and understood them
•
had technical training
•
are authorized to do so by your company
The coupling may only be used in accordance with the technical data (see table 1 to 3 in chapter 1).
Unauthorized modifications on the coupling design are not admissible. We do not take any warranty for resulting
damages. To further develop the product we reserve the right for technical modifications.
The
ROTEX
®
ZS-DKM
and
ZS-DKM-H
described in here corresponds to the technical status at the time of
printing of these mounting instructions.
3 Storage
The coupling hubs are supplied in preserved condition and can be stored at a dry and roofed place for 6 - 9
months.
The features of the coupling spiders (elastomers) remain unchanged for up to 5 years in case of favourable stock
conditions.
!
C A U T I O N !
The storage rooms may not include any ozone-generating devices, like e. g. fluorescent
light sources, mercury-vapour lamps or electrical high-voltage appliances.
Humid storage rooms are not suitable.
Please make sure that there is no condensation. The best relative air humidity is under 65%.