KTR Kupplungstechnik
GmbH
D-48407 Rheine
R O T E X
®
m o u n t i n g
i n s t r u c t i o n s
d e s i g n Z S - D K M a n d Z S - D K M - H
KTR-N
sheet:
edition:
40224 E
2
4
Gezeichnet:
14.07.06 Sha/At
Ersatz für:
Schutzvermerk
ISO 16016 beachten. Geprüft:
07.08.06 Sha
Ersetzt durch:
ROTEX
®
is a torsionally flexible jaw coupling. It is able to compensate for shaft displacement
caused by, as an example, inaccuracies in production, heat expansion, etc.
The
ROTEX
®
design ZS-DKM and ZS-DKM-H is suitable for a larger radial misalignment due
to its double cardanic type. The standard type can only be used for the horizontal assembly.
Table of Contents
1 Technical
Data
2 Hints
2.1
Coupling
Selection
2.2
General
Hints
2.3 Safety and Advice Hints
2.4 General Hints to Danger
2.5
Proper
Use
3 Storage
4 Assembly
4.1 Components of the Couplings
4.2 Hint Regarding the Finish Bore
4.3 Assembly of the Hubs
4.4 Assembly of the Design ZS-DKM1
4.5 Assembly of the Design ZS-DKM3
4.6 Assembly of the Design ZS-DKM-H
4.7 Displacements - Alignment of the Couplings
4.8 Spares Inventory, Customer Service Addresses
5 Enclosure
A
Hints and Instructions Regarding the Use in
Hazardous Areas
5.1 Use
in
Hazardous Areas According to the Regulations
5.2 Control Intervals for Couplings in
Hazardous Areas
5.3 Approximate Values of Wear
5.4 Permissible Coupling Materials in the
Hazardous Area
5.5
Marking of Coupling for the Hazardous Area
5.6
Starting
5.7 Breakdowns, Causes and Elimination
5.8 EC Certificate of Conformity according to the EC Standards 94/9/EC
dated 23 March 1994