KTR-Group OPC Series, Operating And Assembly Instruction Manual

Page: 2 / 20

Oil/air cooler
Series OPC
Operating/Assembly instructions
KTR-N
Sheet:
Edition: 43211 EN
2 of 20
5
Please observe protection
note ISO 16016.
Drawn: 2019-10-23 Pz/Str Replacing: KTR-N dated 2017-01-02
Verified: 2019-11-04 Pz Replaced by:
The oil/air cooler series OPC is an efficient high-performance cooler. It has a compact design and was
developed for cooling hydraulic oil, gear oil and lubricating oil.
1 Technical data 3
2 Advice 6
2.1 General advice 6
2.2 Safety and advice symbols 6
2.3 General hazard warnings 6
2.4 Intended use 7
3 Storage, transport and packaging 7
3.1 Storage 7
3.2 Transport and packaging 7
4 Assembly 8
4.1 Components of oil/air cooler 8
4.2 Place of installation 9
4.3 Assembly of oil/air cooler 10
4.4 Operating pressure and temperature 10
4.5 Electrical connection 11
4.6 Cooling medium 11
4.7 Cleaning 12
4.8 Standard marking of oil/air cooler 12
4.9 Assembly - disassembly of the oil/air cooler into components 12
5 Start-up 13
6 Maintenance and service 13
7 Spares inventory, customer service addresses 14
8 Enclosure A
Advice and instructions regarding the use in potentially explosive atmospheres 15
8.1 Intended use in potentially explosive atmospheres 15
8.2 Marking for potentially explosive atmospheres 16
8.3 Start-up for the use in potentially explosive atmospheres 17
8.4 Permissible accessories for the use in potentially explosive atmospheres 18
8.5 EC Certificate of incorporation 19
8.6 EU Certificate of conformity 20
Table of contents