KTM Freeride E-XC 2018, Owner'S Manual

Page: 86 / 146

13 BRAKE SYSTEM
84
C00733-01
–
Position the new brake linings.
Info
Always change the full set of brake linings.
C00732-10
–
Position retaining spring
5
.
–
Mount bolt 4 .
Info
To make it easier to mount the pin, push the retainer
spring down.
Make sure the retaining spring is seated correctly.
–
Mount cotter pin
3
.
–
Operate the rear brake lever several times until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
A00132-12
–
Fill up the brake fluid to the level A .
Guideline
Level
A
(brake fluid level
below reservoir rim)
5 mm (0.2 in)
Brake fluid DOT 4 / DOT 5.1 ( p. 132)
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
Finishing work
–
Install the KTM PowerPack. ( p. 103)
–
Lock the seat. ( p. 63)