KTM Freeride E-XC 2018, Owner'S Manual

Page: 55 / 146

12 SERVICE WORK ON THE CHASSIS
53
–
Clean and oil the dust boots and inner fork tubes of both fork
legs.
Universal oil spray ( p. 134)
–
Press the dust boots back into their normal position.
–
Remove excess oil.
Finishing work
–
Install the fork protector. ( p. 55)
–
Remove the motorcycle from the lift stand. ( p. 51)
–
Install the KTM PowerPack. ( p. 103)
–
Lock the seat. ( p. 63)
12.5 Removing the fork legs
Preparatory work
–
Deactivate the vehicle. ( p. 37)
–
Fold the seat up. ( p. 63)
–
Remove the KTM PowerPack. ( p. 102)
–
Mount the covering cap. ( p. 65)
–
Raise the motorcycle with a lift stand. ( p. 51)
–
Remove the front wheel. ( p. 85)
–
Remove the headlight mask with the headlight. ( p. 95)
C00797-10
Main work
–
Remove screws
1
and take off the clamp.
–
Remove the cable tie(s) and detach the plug-in connector of
the speedometer sensor.
–
Remove screws
2
and the spacers and take off the brake
caliper.
–
Allow the brake caliper and brake line to hang tension-free to
the side.
C00798-10
–
Release screws
3
. Take out the left fork leg.
–
Release screws
4
. Take out the right fork leg.