KTM Freeride E-XC 2018, Owner'S Manual

Page: 126 / 146

22 TROUBLESHOOTING
124
Faults Possible cause Action
Blink code 44 on the vehicle Fault in the 12 V supply
–
Charge the 12 V battery. ( p. 93)
–
Install a new 12 V battery.
Blink code 45 on the vehicle Fault in the electric motor
–
Switch the main switch off and on.
Blink code 46 on the vehicle Fault in the onboard network
wiring harness or in a switch
–
Switch the main switch off and on.
–
Check the onboard network wiring har-
ness and plug-in connections for exter-
nal damage.
Blink code 51 on the vehicle Fault in the ECU
–
Switch the main switch off and on.
Blink code 52 on the vehicle Fault in the moisture monitor
–
Switch the main switch off and on.
Blink code 53 on the vehicle Fault in the KTM PowerPack
relay
–
Switch the main switch off and on.
Blink code 54 on the vehicle Fault in the insulation monitor
–
Clean and dry the discharge plug and
discharge socket without compressed
air.
Speedometer values deleted
(time, stop watch, lap times) The battery in the combination
instrument is discharged
–
Change the speedometer battery.
(
p. 100)
The high beam, low beam,
parking light, tail light, and
license plate lamp are not
working Fuse 3 blown
–
Change the fuses of individual power
consumers. (
p. 94)
The speedometer, horn, brake
light, and turn signal are not
working Fuse 4 blown
–
Change the fuses of individual power
consumers. (
p. 94)