KTM Freeride E-XC 2018, Owner'S Manual

Page: 121 / 146

20 CLEANING, CARE
119
20.1 Cleaning the motorcycle
Note
Material damage The vehicle and the KTM PowerPack are not suitable for high-pressure cleaning.
The high pressure allows water to penetrate electrical components, plugs, bearings, etc. This results in compo-
nents being damaged or destroyed.
–
Never clean the vehicle and the KTM PowerPack with high-pressure cleaning equipment or a strong jet of
water.
Note
Material damage Water or dirt damage or destroy components.
–
Always mount the covering cap if you have removed the KTM PowerPack.
–
Do not point the jet of water toward the battery discharge plug, even if the covering cap has been mounted.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, cleaning agents, brake fluid etc. properly and in compliance with the applica-
ble regulations.
Info
If you clean the motorcycle regularly, its value and appearance will be maintained over a long period.
Avoid direct sunshine on the motorcycle during cleaning.
Preparatory work
–
Deactivate the vehicle. ( p. 37)
–
Fold the seat up. ( p. 63)
–
Remove the KTM PowerPack. ( p. 102)
–
Mount the covering cap. ( p. 65)
401061-01
Main work
–
Remove coarse dirt particles with a gentle spray of water.
–
Spray very dirty areas with a normal motorcycle cleaner and
then clean with a paintbrush.
Motorcycle cleaner ( p. 134)
Info
Use warm water containing normal motorcycle cleaner
and a soft sponge.
Never apply motorcycle cleaner to the dry vehicle;
always rinse with water first.
–
After rinsing the motorcycle with a gentle spray of water, allow
it to dry thoroughly.
Warning
Danger of accidents Moisture and dirt impair the
brake system.
–
Brake carefully several times to dry out and remove
dirt from the brake linings and the brake discs.
–
Lubricate all sliding points and pivot points.
–
Clean the chain. ( p. 66)