KTM Freeride E-XC 2018, Owner'S Manual

Page: 122 / 146

20 CLEANING, CARE
120
–
Treat bare metal (except for brake discs) with a corrosion
inhibitor.
Preserving materials for paints, metal and rubber
(
p. 134)
–
Treat all plastic parts and powder-coated parts with a mild
cleaning and care product.
Special cleaner for glossy and matte paint finishes, metal
and plastic surfaces (
p. 134)
Finishing work
–
Install the KTM PowerPack. ( p. 103)
–
Lock the seat. ( p. 63)
20.2 Checks and maintenance steps for winter operation
Info
If the motorcycle is used in the winter, salt can be expected on the roads. Precautions need to be taken
against road salt corrosion.
If the vehicle was operated in road salt, clean it with cold water after riding. Warm water would enhance
the corrosive effects of salt.
401060-01
–
Clean the motorcycle. ( p. 119)
–
Clean the brake system.
Info
After EVERY trip on salted roads, thoroughly wash the
brake calipers and brake linings with cold water and dry
carefully. This should be done after the parts are cooled
down and while they are installed.
After riding on salted roads, thoroughly wash the motor-
cycle with cold water and dry it well.
–
Treat the engine, swingarm, and all other bright and zinc-
plated parts (except for the brake discs) with a wax-based cor-
rosion inhibitor.
Info
Corrosion inhibitor is not permitted to come in contact
with the brake discs as this would greatly reduce the
braking force.
–
Clean the chain. ( p. 66)