KTM Freeride E-XC 2018, Owner'S Manual

Page: 100 / 146

15 ELECTRICAL SYSTEM
98
C00814-10
–
Press headlight bulb
3
lightly into the bulb socket, turn it
counterclockwise, and pull it out.
–
Insert the new headlight bulb.
Headlight (S2/socket BA20d) ( p. 128)
–
Insert the rubber cap with the bulb socket into the reflector
and turn it clockwise all the way.
Info
Ensure that O-ring
4
is seated properly.
–
Insert the bulb socket of the parking light into the reflector.
Finishing work
–
Refit the headlight mask with the headlight. ( p. 96)
–
Install the KTM PowerPack. ( p. 103)
–
Lock the seat. ( p. 63)
–
Check the headlight setting. ( p. 99)
15.8 Changing the turn signal bulb (Option: Turn signal, round)
Note
Damage to reflector Grease on the reflector reduces the brightness.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
Preparatory work
–
Deactivate the vehicle. ( p. 37)
–
Fold the seat up. ( p. 63)
–
Remove the KTM PowerPack. ( p. 102)
–
Mount the covering cap. ( p. 65)
A00135-10
Main work
–
Remove the screw on the rear of the turn signal housing.
–
Carefully remove diffuser 1 .