KTM Freeride E-XC 2018, Owner'S Manual

Page: 68 / 146

12 SERVICE WORK ON THE CHASSIS
66
12.24 Checking the battery discharge plug form ring
Condition
The KTM PowerPack has been removed.
The covering cap has been removed.
C00776-10
–
Check the battery discharge plug form ring 1 on the electric
motor.
» If the battery discharge plug form ring is dirty:
–
Ascertain that the discharge plug is de-energized.
–
Clean the form ring without using water or compressed
air.
–
Cover the contacts and spray silicone spray onto the
form ring.
» If the battery discharge plug form ring is damaged:
–
Change the battery discharge plug form ring.
12.25 Checking for chain dirt accumulation
400678-01
–
Check the chain for coarse dirt accumulation.
» If the chain is very dirty:
–
Clean the chain. ( p. 66)
12.26 Cleaning the chain
Warning
Danger of accidents Oil or grease on the tires reduces the road grip.
–
Remove the lubricant from the tires using a suitable cleaning agent.
Warning
Danger of accidents
Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, cleaning agents, brake fluid etc. properly and in compliance with the applica-
ble regulations.
Info
The service life of the chain depends largely on its maintenance.
Preparatory work
–
Deactivate the vehicle. ( p. 37)
–
Fold the seat up. ( p. 63)
–
Remove the KTM PowerPack. ( p. 102)