KTM Freeride E-XC 2018, Owner'S Manual

Page: 97 / 146

15 ELECTRICAL SYSTEM
95
C00922-10
–
Remove the defective fuse.
Guideline
Fuses
res
- 10 A and 20 A - spare fuses
Fuse 1 - 20 A - main fuse, motor electronics control unit,
ignition lock
Fuse
2 - 10 A - ignition lock, main switch, tip switch
Fuse 3 - 10 A - high beam, low beam
Fuse 4 - 10 A - horn, brake light, turn signal
Fuse 5 - 10 A - water pump
Info
You can recognize a faulty fuse by a burned-out fuse
wire
A
.
Warning
Fire hazard Incorrect fuses overload the electrical sys-
tem.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
–
Use spare fuses with the correct rating only.
Fuse (58011109110) ( p. 128)
Fuse (58011109120) ( p. 128)
Tip
Replace the spare fuse in the fuse box so that it is
available if needed.
–
Check that the power consumer is functioning properly.
–
Close the fuse box cover and allow the catches to engage.
Finishing work
–
Install the KTM PowerPack. ( p. 103)
–
Lock the seat. ( p. 63)
15.5 Removing the headlight mask with the headlight
Preparatory work
–
Deactivate the vehicle. ( p. 37)
–
Fold the seat up. ( p. 63)
–
Remove the KTM PowerPack. ( p. 102)
–
Mount the covering cap. ( p. 65)