KTM Freeride 250 R AUS 2014, Repair Manual

Page: 81 / 222

15 WIRING HARNESS, BATTERY
79
15.1 Changing the main fuse
Warning
Fire hazard The electrical system can be overloaded if the wrong fuses are used.
–
Use only fuses with the prescribed amperage. Never by-pass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle. It is located in the starter relay housing under the seat.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Fold the seat up. ( p. 62)
B01684-10
Main work
–
Remove protection cap
1
.
B01685-10
–
Remove the faulty main fuse
2
.
Info
A defective fuse is indicated by a burned-out fuse wire
A
.
A reserve fuse
3
is located in the starter relay.
–
Install a new main fuse.
Fuse (58011109110) ( p. 172)
–
Check that the electrical equipment is functioning properly.
Tip
Insert the spare fuse so that it is available if needed.
–
Mount the protection cap.
Finishing work
–
Lock the seat. ( p. 62)
15.2 Changing the fuses of individual power consumers
Info
The fuse box containing the fuses of individual power consumers is located under the seat.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Fold the seat up. ( p. 62)
B01682-10
Main work
–
Open fuse box cover
1
.