KTM Freeride 250 R AUS 2014, Repair Manual

Page: 136 / 222

18 30/ENGINE
134
303065-10
–
Move starter idler gear
1
back and forth in the direction of rotation.
–
Check for play.
Guideline
Play may not exceed half the tooth width.
» If the play is greater:
–
Remove the cover.
–
Add enough compensating disks
8
to eliminate the play.
–
Remove one compensating disk again.
Guideline
Compensating disk 0.10 mm (0.0039 in)
–
Check the play again.
–
Grease all pivot points.
Lubricant (T625) ( p. 204)
18.5 Engine assembly
18.5.1 Installing the crankshaft
202769-11
–
Mount O-ring
1
.
202768-11
–
Position the right section of the engine case in the engine work stand.
Engine assembly stand (61229001000) ( p. 209)
Engine fixing arm (56029002030) ( p. 208)
–
Warm up the crankshaft bearing.
Guideline
100 °C (212 °F)
–
Slide crankshaft
2
all the way into the bearing seat of the right section of the
engine case.
18.5.2 Installing the transmission shafts
202767-10
–
Oil all bearing.
Engine oil (15W/50) ( p. 202)
–
Assemble the two transmission shafts
1
and slide them into the bearing seats
together.