9
SHOCK ABSORBER, SWINGARM
49
201750-11
–
Position the special tool on the piston rod.
Mounting sleeve (T1554) (
–
Grease the dust boot and slide seal ring retainer
3
onto the piston rod.
Lubricant (T625) (
–
Remove the special tool.
–
Mount rebound washer
4
.
Info
The notch faces upward.
201751-11
–
Mount compression shim stack
5
with the smaller shims facing downward.
201752-11
–
Sand both sides of piston
6
on a surface plate using 1200-grit sandpaper.
–
Clean the piston.
–
Mount the piston.
Guideline
View
A
Top view of piston
View
B
Bottom view of piston
201753-11
–
Mount rebound shim stack
7
with the smaller shims at the top.
–
Install supporting plate
8
.
201755-11
–
Mount and tighten nut
9
.
Guideline
Nut, piston rod, large rod
M12x1
40 Nm
(29.5 lbf ft)
–
Mount sleeve
bk
.
201756-11
–
Mount compression shim stack
bl
with the smaller shims facing downward.
