6
FORK, TRIPLE CLAMP
23
200718-10
–
Grease the O-ring of tap rebound
3
.
Lubricant (T158) (
–
Mount and tighten the tap rebound.
Guideline
Tap rebound
M9x1
18 Nm
(13.3 lbf ft)
Loctite
®
2701™
–
Position spring
4
.
201464-10
–
Mount shim stack
5
with the smaller shims facing downward.
–
Press the shim stack downward against the spring force.
Info
The shim stack must be pressed downward over the collar.
–
Mount piston
6
with the piston ring.
Info
The side with the largest inside diameter faces downward.
201465-10
–
Mount shim stack
7
.
Info
Align the triangular plate exactly with the piston opening.
–
Mount and tighten nut
8
.
Guideline
Tap rebound nut
M6x0.5
5 Nm (3.7 lbf ft)
Info
Mount the nut with the collar facing downward.
–
Secure the nut by locking.
200696-11
–
Slide screw sleeve
9
with the washer and spring seat onto the cartridge.
200721-10
–
Screw on water excluder
bk
to the stop.
Info
The water excluder must be screwed on tightly against the stop. Do not use
a tool.
–
Slide piston rod
bl
into cartridge
bm
.
200693-11
–
Clamp the special tool in a bench vise.
Pin (T605) (
–
Hitch cartridge
bm
by using the drilled holes.
