WORK 3
13
M00610-10
–
Disconnect both negative cables
3
from the 12-V battery.
–
Disconnect both positive cables
4
from the 12-V battery.
–
Take the 12-V battery and battery case
5
out of the battery
compartment.
3.6
Installing the 12-V battery
Warning
Risk of injury
Battery acid and battery gases cause serious chemical burns.
–
Keep 12 V batteries out of the reach of children.
–
Wear suitable protective clothing and safety glasses.
–
Avoid contact with battery acid and battery gases.
–
Keep sparks or open flames away from the 12 V battery.
–
Only charge 12 V batteries in well-ventilated rooms.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes with water for at least 15 minutes and consult a doctor immediately if battery acid and
battery gases get into the eyes.
Caution
Danger of accidents
Electronic components and safety devices will be damaged if the 12-V battery is dis-
charged or missing.
–
Never operate the vehicle with a discharged 12-V battery or without a 12-V battery.
M00610-11
Main work
–
Position the 12-V battery in battery case
1
.
Guideline
The even side of the battery case must be opposite the
poles.
–
Position the 12-V battery with the battery case in the battery
compartment.
–
Position both positive cables
2
and mount and tighten the
screw.
Guideline
Screw, battery termi-
nal
M6
4.5 Nm
(3.32 lbf ft)
–
Position the negative cable
3
and mount and tighten the
screw.
Guideline
Screw, battery termi-
nal
M6
4.5 Nm
(3.32 lbf ft)
