SETUP 2
5
F01345-01
–
Mount and tighten the rear mirror on both sides.
F01010-10
–
Mount rear reflector
1
with spring washers
2
on holding
plate
3
.
–
Mount the retaining plate on the license plate holder.
(all EU/JP/CN models)
–
Mount the license plate holder.
(US)
–
Bond the reflectors on the right and left side of the reflec-
tor holder.
–
Mount the reflector holder and the license plate holder.
–
Carefully loosen and remove the tension belt over the link fork.
Guideline
An assistant prevents the motorcycle from falling over.
–
Carefully loosen and remove the tension belts around the lower
triple clamp.
The vehicle is released at the front.
–
Together with an assistant, take the vehicle off the pallet.
F00999-10
–
Remove radiator shield
4
.
–
Remove screws
5
.
–
Position radiator guard.
Info
Pay attention to the guides and the holding lugs.
–
Mount and tighten screws
5
.
Guideline
Screw, cooler retain-
ing bracket
M6
7 Nm (5.2 lbf ft)
–
Mount and tighten screws
6
.
Guideline
Screw, cooler retain-
ing bracket
M6
7 Nm (5.2 lbf ft)
