KTM F9903S6 Setup Instructions Download

Page: 16 / 26

3 WORK

S02275-10

–

Close cover

and gently push down.

The cover engages with an audible click.

Finishing work

–

Mount the seat. (

p. 10)

–

Set the time and date.

3.7

Setting the time and date

Condition

The motorcycle is stationary.

F01318-01

–

Press the

SET

button when the menu is closed.

–

Press the

DOWN

button until

Preferences

appears. Press

the

SET

button to open the menu.

–

Press the

DOWN

button until

Time/Date

is marked. Press

the

SET

button to open the menu.

F01319-01

Setting the clock

–

Press the

DOWN

button until the time is marked.

–

Press the

SET

button.

The hour next to

Clock

flashes.

–

Press the

DOWN

button until the current hour is set.

–

Press the

SET

button.

The minute next to

Clock

flashes.

–

Press the

DOWN

button until the current minute is

set.

–

Press the

SET

button.

The time is stored.

F01320-01

Setting the date

Info

The date format may differ depending on the language
set.

–

Press the

DOWN

button until the date is marked.

–

Press the

SET

button.

The month next to

Date

flashes.

–

Press the

DOWN

button until the current month is

set.

–

Press the

SET

button.

Summary of Contents for F9903S6



























Search results

Summary of Contents for F9903S6

Reviews:

Related manuals for F9903S6

Brands by name

Popular brands

KTM F9903S6, Setup Instructions

Search results

Summary of Contents for F9903S6

Reviews:

Related manuals for F9903S6

Brands by name

Popular brands