2 SETUP
4
F01005-01
–
Remove the controls from the transport holder.
–
Remove the screws and handlebar clamps.
–
Remove the transport holder.
F00995-01
–
Remove the right hand guard.
–
Position the controls on the right half of the handlebar.
Tighten the screws.
Guideline
Remaining screws,
chassis
M5
5 Nm (3.7 lbf ft)
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
–
Mount the right hand guard.
F00996-10
Warning
Danger of accidents
A repaired handlebar poses a
safety risk.
If the handlebar is bent or straightened, the mate-
rial becomes fatigued. The handlebar may break as a
result.
–
Change the handlebar if the handlebar is damaged
or bent.
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position handlebar clamps. Tighten the screws evenly.
Guideline
Screw, handlebar
clamp
M8
20 Nm (14.8 lbf ft)
Markings
A
face backwards.
Handlebar scale markings
B
are located centrally
between the handlebar clamps.
–
Check the throttle grip for smooth operation.
