KTM BUI215 Operating Instructions Manual Download

Page: 60 / 74

Eng

lish – Pa

ge 58

uts

ch – S
eit

e 56

English –

Code

Cause

Corrective measures

540

Temperature error

The eBike is outside of the permissible temperature range. Switch

off the eBike system and allow the drive unit to either cool down or

heat up to the permissible temperature range. Restart the system.

If the problem persists, contact your Bosch eBike dealer.

550

An impermissible load has been detected. Remove the load. Restart the system. If the problem persists, con-

tact your Bosch eBike dealer.

580

Software version error

Restart the system. If the problem persists, contact your Bosch

eBike dealer.

591

Authentication error

Switch off the eBike system. Remove the battery pack and reinsert

it. Restart the system. If the problem persists, contact your Bosch

eBike dealer.

592

Incompatible component

Use a compatible display. If the problem persists, contact your

Bosch eBike dealer.

593

Configuration error

Restart the system. If the problem persists, contact your Bosch

eBike dealer.

595, 596

Communication error

Check the wiring to the drive and restart the system. If the problem

persists, contact your Bosch eBike dealer.

602

Internal battery fault

Restart the system. If the problem persists, contact your Bosch

eBike dealer.

603

Internal battery fault

Restart the system. If the problem persists, contact your Bosch

eBike dealer.

605

Battery temperature error

The battery is outside of the permissible temperature range.

Switch off the eBike system and allow the battery to either cool

down or heat up to the permissible temperature range. Restart the

system. If the problem persists, contact your Bosch eBike dealer.

606

External battery fault

Check the wiring. Restart the system. If the problem persists, con-

tact your Bosch eBike dealer.

610

Battery voltage error

Restart the system. If the problem persists, contact your Bosch

eBike dealer.

620

Charger fault

Replace the charger. Contact your Bosch eBike dealer.

640

Internal battery fault

Restart the system. If the problem persists, contact your Bosch

eBike dealer.

655

Multiple battery faults

Switch off the eBike system. Remove the battery pack and reinsert

it. Restart the system. If the problem persists, contact your Bosch

eBike dealer.

656

Software version error

Contact your Bosch eBike dealer so that they can perform a

software update.

7xx

Error relating to third-party components

Observe the information in the operating instructions of the re-

spective component manufacturer.

800

Internal ABS fault

Contact your Bosch eBike dealer.

810

Implausible signals from the wheel speed

sensor

Contact your Bosch eBike dealer.

820

Fault in the wire to the front wheel speed

sensor

Contact your Bosch eBike dealer.

821 to 826 Implausible signals from the front wheel

speed sensor
The sensor disc may be missing, defective

or fitted incorrectly; there is a significant

difference in diameter between the front

wheel and the rear wheel; extreme riding

Restart the system and carry out a test ride lasting at least two

minutes. The ABS indicator light must go out. If the problem per-

sists, contact your Bosch eBike dealer.

1 207 020 XBP | (11.03.2020)

Bosch eBike Systems

Summary of Contents for BUI215











































































Search results

Summary of Contents for BUI215

Reviews:

Related manuals for BUI215

Brands by name

Popular brands

KTM BUI215, Operating Instructions Manual

Search results

Summary of Contents for BUI215

Reviews:

Related manuals for BUI215

Brands by name

Popular brands