En
glish – Pa
ge 5
Safety instructions for child EPACs
￭
Read all the safety instructions and familiarise your child with their contents. So keep these operating
instructions in a safe place for future reference. A failure to comply with the safety instructions can
cause electric shocks, fire and/or severe injuries.
￭
Electric shock is a mortal danger. Cables must not be bent, compressed or damaged on sharp edges.
￭
The battery may ignite or even explode if its protective circuit and protective mechanism become dam-
aged. This may present a mortal danger. Always remove the battery if you are performing maintenance,
repair or cleaning tasks.
￭
Never leave your child unsupervised when using and handling the EPAC.
Familiarise your child with all functions before using the EPAC.
￭
Give your child detailed instruction on how to use the EPAC.
Incorrect use cannot otherwise be ruled out.
￭
Child EPACs are only suitable for use on asphalted cycleways and roads.
Use on the pavement is prohibited.
￭
Never allow your child to handle or clean the EPAC with tools or bare hands.
￭
Before each journey with your child, make sure that all components are adjusted correctly and that the screw
connections and quick release are closed tight.
Refer to the chapter on
“Information about the operating instructions“
, section
“Before the first ride”
and
“Before
every ride”
.
￭
Make certain that the frame size and operating elements are adjusted to the size of your child.
An incorrect frame size may negatively affect the operability and controllability of the EPAC – for instance, the rider
may be unable to operate the brakes properly.
￭
Compared to a conventional EPAC, the following aspects were limited on the child EPAC to make sure that the safety
of your child is guaranteed at all times.
￭
The pedal assist speed was restricted to 20 km/h.
￭
The push aid function was disabled.
￭
The EPAC is initially in OFF mode when it is activated.
￭
The maximum permissible weight (rider + luggage) of a child EPAC is 50 kg.
General instructions
Please note removing a control panel or battery does not protect the bicycle against theft. The drive components can be
used to operate your EPAC, even without the assist functions. You must therefore use a safe and tested bicycle lock to
attach your EPAC to a fixed object at all times (bicycle stand, etc.). Your KTM dealer will gladly assist you in selecting the
right bicycle lock.
Always remove the battery and keep it in a dry and under no circumstances unusually cold place (room temperature) if you
will do not intend to use the EPAC for a longer period.
Conformity
The complete KTM EU Declaration of Conformity is included in these instructions (refer to the
“KTM Declaration of Conformity”
chapter). The complete Bosch EU Declarations of Conformity are available at the following Internet address: www.bosch-
ebike.com/conformity.
