Eng
lish – Pa
ge 36
De
uts
ch – S
eit
e 34
English –
7
Status screen
As well as the status bar, the
status page also shows you
the current time and the state
of charge of all your eBike's
batteries, as well as the state
of charge of your smartphone
battery if the smartphone is
connected via
Bluetooth
®.
It may also display symbols to
indicate an activated
Bluetooth
® function or a
device connected via
Bluetooth
® (e.g. a heart-rate
monitor). You will also be
shown the date of the most recent synchronisation between
the smartphone and Kiox.
You can access the
<Settings>
from the bottom section.
<Settings>
You can access the settings menu via the status page. The
<Settings>
cannot be accessed or changed while riding.
You can use the
–
(11)
and
+
(12)
buttons to select the set-
ting you want. You can open the settings, as well as any addi-
tional submenus, using the select button
(9)
. You can use
the
<
button
(10)
to go back to the previous menu from any
settings menu.
You can find the following superordinate sections on the first
navigation level:
–
<Registration>
– Information about registration:
This menu item is only displayed if you have not yet re-
gistered with eBike Connect.
–
<My eBike>
– Settings for your eBike
You can reset the counters (such as the number of kilo-
metres travelled that day or average values) to zero either
automatically or manually, and you can reset the range.
You can change the wheel circumference value that was
preset by the manufacturer by ±5 %. If your eBike fea-
tures
eShift
, you can also configure your eShift system
here. The bicycle manufacturer or dealer may base the
service date on the distance travelled and/or a period of
time. The due date for the service is displayed under
<Next Service: [DD. Mon. YYYY] or at [xxxxx] [km]>
.
The bike component page displays the serial number and
hardware and software versions for each component in
addition to other key data which is relevant for the com-
ponents.
–
<My profile>
– Active user data
–
<Bluetooth>
– Switching the
Bluetooth
® function on or
off:
Connected devices are displayed.
–
<Sys settings>
– A list of setting options for your on-
board computer
You can display the speed and distance in kilometres or
miles, display the clock in 12- or 24-hour format, adjust
the time, date and time zone and select your preferred
language. You can reset the Kiox to its factory settings,
run a software update (if available) and choose between a
black or white design.
–
<Information>
– Information about your Kiox
Information on FAQs (frequently asked questions), certi-
fication, contact information, information on licences
You can find a detailed description of each parameter in the
online operating instructions at
www.Bosch-eBike.com/Kiox-manual.
Quick Menu
Selected settings are displayed on the
Quick Menu
. These
settings can be changed even while riding.
You can access the
Quick Menu
via the select button
(9)
. It
cannot be accessed from the
Status screen
.
The following settings can be changed via the
Quick Menu
:
–
<Reset trip data?>
All data on the journey so far is reset to zero.
–
<eShift>
You can set the cadence here.
–
<eSuspension>
This is where you can set a manufacturer-defined shock
absorption or suspension mode.
Bosch eBike Systems
1 270 020 XBK | (17.03.2020)
