30/ENGINE
105
–
Take off the clutch push rod.
300216-10
–
Unscrew the electrical connection
from the starter motor.
–
Remove ground wire
from the starter motor.
300217-10
–
Loosen hose clip
.
–
Pull off the throttle valve body from the rear.
300218-10
–
Disconnect plug-in connections
of the gear position sensor, the crankshaft posi-
tion sensor and the alternator.
–
Remove the cable binders and release the cables.
300188-10
–
Pull of the spark plug connector.
–
Unplug the connector of the engine coolant temperature sensor
.
300220-10
–
Loosen the spring-loaded band-type clamp
from the breather, SLS and oil return
line with the special tool.
Pliers for spring-loaded band-type clamp (60029057100) (
300221-10
–
Remove screws
. Remove the engine bearer.
Summary of Contents for 690 Enduro AUS 2010
Page 2: ......