30/ENGINE ASSEMBLY
162
21.12
Installing the locking lever
304998-10
–
Mount locking lever
1
with the washer, sleeve and spring.
–
Mount and tighten screw
2
.
Guideline
Screw, locking lever
M5
6 Nm
(4.4 lbf ft)
Loctite
®
243™
21.13
Installing the shift drum locating unit
304996-11
–
Push away locking lever
1
from the shift drum locating unit and position the shift
drum locating unit
2
.
Info
The flat areas of the shift drum locating unit are not symmetric.
–
Relieve tension from the locking lever.
–
Mount and tighten screw
3
.
Guideline
Screw, shift drum locating
M6
10 Nm
(7.4 lbf ft)
Loctite
®
243™
21.14
Installing the shift shaft
304995-11
–
Slide shift shaft
1
with the washer into the bearing seat.
–
Push sliding plate
2
away from the shift drum locating unit
3
. Insert the shift
shaft all the way.
–
Let the sliding plate engage in the shift drum locating unit.
–
Shift through the transmission.
21.15
Installing the intermediate kick starter gear
304994-10
–
Slide on intermediate kick starter gear
1
with the collar facing the engine case.
–
Position the washer and mount the lock ring.
21.16
Installing the kick starter shaft
Preliminary work
–
Preassemble the kick starter shaft. (