KTM 250 SX-F 2005, Repair Manual

Page: 74 / 125

6-5
– Mount the suction pump rotors
1
with the marks facing the case.
The marks should no longer be visible when mounted.
– Insert the needle roller
2
in the recess of the oil pump shaft and
inner rotor.
– Fill the oil pump with engine oil.
– Insert a new O-ring
3
and mount the oil pump cover
4
. Apply
Loctite 222 to the screws and tighten to 6 Nm.
– Insert the preassembled kickstarter shaft in the seat of the engine
case; slightly turn the kickstarter shaft in a clockwise direction until
the kickstarter ratchet gear
5
stops behind the stop plate
6
. Attach
the kickstarter spring again.
1
2
3
4
5
6