KTM 250 SX-F 2005, Repair Manual

Page: 77 / 125

Mounting the clutch
– Slide the inner ring
1
, needle bearing
2
and outer clutch hub on
the main shaft.
NOTE: Turn the starter idler
3
, oil pump gear
4
and outer clutch hub
back and forth until the toothing engages.
– Slide on the stop disk and driver.
– Apply Loctite 243 to the driving nut
5
and mount with a new lock
washer
6
.
– Hold the driver with special tool 503.29.003.000 and tighten the
driving nut to 120 Nm (A/F 27).
– Turn down the lock washer the driving nut.
– Insert the pressure piece
7
.
– Thoroughly oil all lining disks.
– Starting with lining disk
8
, insert all 8 lining disks and all 7 clutch
disks
9
in the outer clutch hub, ending with a lining disk on top.
6-8
Repair manual KTM 250 SX-F
Art.-No. 3.206.027-E
1
2
3
4
9
1
2
6
5
8
7