KTM 2013 690 SMC R EU, Repair Manual

Page: 107 / 230

16 ENGINE
105
S00093-11
–
Attach the spark plug connector
8
.
–
Plug in the connector of the engine coolant temperature sensor
9
.
–
Position the oil pressure sensor and mount and tighten screw
bk
.
–
Detach connector
bl
of the oil pressure sensor.
S00094-11
–
Reconnect connectors
bm
of the gear position sensor, the crankshaft position sen-
sor, and the alternator.
S00092-11
–
Push the throttle valve body into the intake flange.
–
Position and tighten hose clip
bn
.
S00091-11
–
Position the electrical connection on the starter motor.
–
Mount and tighten screw
bo
.
Guideline
Screw, cable on starter motor M5 3 Nm (2.2 lbf ft)
–
Position the ground wire on the starter motor.
–
Mount and tighten screw
bp
.
Guideline
Screw, starter motor M6 10 Nm
(7.4 lbf ft) Loctite ® 243™
S00089-11
–
Insert the clutch push rod.
–
Position the clutch slave cylinder.
–
Mount and tighten screws
bq
.
Guideline
Screw, clutch slave cylin-
der M6x20 10 Nm
(7.4 lbf ft) Loctite ® 243™
Screw, clutch slave cylin-
der M6x35 10 Nm
(7.4 lbf ft)
–
–
Mount the engine sprocket with the chain.
–
Position the new lock washer and mount nut
br
but do not tighten yet.
S00090-11
–
Position the rear wheel.
–
Mount the chain adjuster and nut.
–
Push the rear wheel forward so that the chain adjusters are on the tensioning
screws, and tighten the nut
bs
.
Guideline
Nut, rear wheel spindle M25x1.5 90 Nm
(66.4 lbf ft)