15
COOLING SYSTEM
80
L00930-10
–
Position the corresponding radiator cover
and attach the radiator shield at hold-
ing lugs
. Attach mounting points
at the radiator.
15.4
Removing the radiator cover (All SX models)
L00941-10
–
Detach radiator shield
at mounting points
and remove it. Remove radiator
cover
.
L00942-10
–
Attach the radiator shield at holding lugs
. Attach mounting points
at the
radiator.
15.5
Checking the antifreeze and coolant level
Warning
Danger of scalding
During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not remove the radiator cap, radiator hoses or other cooling system components when the engine is hot. Allow the
engine and cooling system to cool down. In case of scalding, rinse immediately with lukewarm water.
Warning
Danger of poisoning
Coolant is poisonous and a health hazard.
–
Coolant must not come into contact with the skin, eyes, or clothing. If contact occurs with the eyes, rinse with water imme-
diately and contact a physician. Immediately clean contaminated areas on the skin with soap and water. If coolant is swal-
lowed, contact a physician immediately. Change clothing that is contaminated with coolant. Keep coolant out of reach of
children.
Condition
The engine is cold.
400243-10
–
Stand the motorcycle upright on a horizontal surface.
–
Remove the radiator cap.
–
Check the coolant antifreeze.
−
25…
−
45 °C (
−
13…
−
49 °F)
» If the coolant antifreeze does not meet specifications:
–
Correct the coolant antifreeze.
–
Check the coolant level in the radiator.
Coolant level
above the radiator
fins.
10 mm (0.39 in)
Summary of Contents for 125 SX EU 2015
Page 2: ......
