17
SERVICE WORK ON THE ENGINE
90
17.3
Draining the gear oil
x
Warning
Danger of scalding
Engine oil and gear oil get very hot when the motorcycle is ridden.
–
Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.
Warning
Environmental hazard
Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
Only drain the gear oil while the engine is warm.
Preparatory work
–
Park the motorcycle on a level surface.
–
Place a suitable container under the engine.
B02134-10
Main work
(125/150 SX)
–
Remove the gear oil drain plug with magnet
.
–
Remove gear oil drain plug
.
–
Completely drain the gear oil.
–
Clean the gear oil drain plug thoroughly.
–
Clean the sealing area on the engine.
–
Mount the gear oil drain plug with magnet
and the seal ring and tighten.
Guideline
Gear oil drain plug with magnet
M12x1.5
20 Nm
(14.8 lbf ft)
–
Mount gear oil drain plug
with the seal ring and tighten.
Guideline
Gear oil drain plug
M10x1
15 Nm
(11.1 lbf ft)
B02133-10
(All 250/300 models)
–
Remove the gear oil drain plug with magnet
.
–
Completely drain the gear oil.
–
Clean the gear oil drain plug with the magnet thoroughly.
–
Clean the sealing area on the engine.
–
Mount the gear oil drain plug with magnet
and the seal ring and tighten.
Guideline
Gear oil drain plug with magnet
M12x1.5
20 Nm
(14.8 lbf ft)
17.4
Refilling with gear oil
x
Info
Too little gear oil or poor-quality oil results in premature wear of the transmission.
Summary of Contents for 125 SX EU 2015
Page 2: ......
