11
SERVICE WORK ON THE CHASSIS
57
800202-10
–
Check the chain sliding piece for wear.
» If the lower bolt edge of the chain is in line with or below the chain sliding
piece:
–
Change the chain sliding piece.
x
–
Check the chain sliding piece for tightness.
» If the chain sliding piece is loose:
–
Tighten the chain sliding piece.
Guideline
Screw, chain sliding piece
M8
15 Nm
(11.1 lbf ft)
401760-01
–
Check the chain guide for wear.
Info
Wear can be seen on the front of the chain guide.
» If the light part of the chain guide is worn:
–
Change the chain guide.
x
B02104-01
–
Check the chain guide for tightness.
» If the chain guide is loose:
–
Tighten the chain guide.
Guideline
Remaining screws, chassis
M6
10 Nm
(7.4 lbf ft)
Remaining nuts, chassis
M6
10 Nm
(7.4 lbf ft)
Finishing work
–
Remove the motorcycle from the lift stand. (
11.39
Checking the frame
x
800206-10
–
Check the frame for cracking and deformation.
» If the frame exhibits cracking or deformation due to a mechanical impact:
–
Change the frame.
x
Info
A frame that has been damaged due to a mechanical impact must
always be changed. Repair of the frame is not authorized by KTM.
Summary of Contents for 125 SX EU 2015
Page 2: ......
