11
SERVICE WORK ON THE CHASSIS
61
11.46
Changing the hydraulic clutch fluid
x
Warning
Environmental hazard
Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
L00953-10
(125/150 SX)
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal posi-
tion.
–
Remove screws
.
–
Remove cover
with membrane
.
B02109-10
–
Fill bleeding syringe
with the appropriate hydraulic fluid.
Bleed syringe (50329050000)
Hydraulic fluid (15) (
–
On the slave cylinder of the clutch, remove bleeder screw
and mount bleed-
ing syringe
.
L00953-11
–
Inject the liquid into the system until it escapes from bore hole
of the mas-
ter cylinder without bubbles.
–
To prevent overflow, drain fluid occasionally from the master cylinder reservoir.
–
Remove the bleeding syringe. Mount and tighten the bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level under top level of con-
tainer
4 mm (0.16 in)
–
Position the cover with the membrane. Mount and tighten the screws.
L01222-10
(250 SX EU, 250 SX US)
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal posi-
tion.
–
Remove screws
.
–
Remove cover
with membrane
.
B02110-10
–
Fill bleeding syringe
with the appropriate hydraulic fluid.
Bleed syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
–
On the slave cylinder of the clutch, remove bleeder screw
and mount bleed-
ing syringe
.
Summary of Contents for 125 SX EU 2015
Page 2: ......
