KTI KS-2300, User Manual

Page: 56 / 85

50
u
Rate Control
With this function, you can set the traffic rate control for each physical port.
(You can set the rate control for 10/100M ports only.) This switch supports
10 levels rate control from line speed. You select one of the ten levels to
limit the traffic rate allowed on ports. You can also select the traffic type for
rate control is streaming or burst.
Note : If the "Delay Sensitive Application" option of any active profile is
enable, you will meet a error message when you try to set the rate control.
Please try to activate another profile with the "Delay Sensitive Application"
option disable because the Delay Bound scheduling operation conflict with
rate control operation of the switch. We suggest that you may use Profiles
3,4,7,8 as the active profiles for rate control
operation because they are "Delay Sensitive
Application" disable.