KTI KS-2300 User Manual Download Page 44 | Manualshive

Page: 44 / 85

background image

38

n

Other Protocols

You can enable / disable

GVRP

and

IGMP

protocols here. The GVRP

(GARP VLAN Registration Protocol) protocol can handle the VLAN activity
inside the switch and between switches. The IGMP (Internet Group
Management Protocol) protocol can handle IP multicast activity in the
network. This switch supports IGMP Snooping operation for IP multicast
packets filtering and forwarding.

If you want to change the configuration, highlight the item that you want to
change and press Enter.
GVRP : Enable - enable GVRP operation
Disable - disable GVRP operation
IGMP : Disable - disable IGMP operation
Passive - Passively snooping on the IGMP Query and IGMP Report

packets transferred between IP Multicast Routers and IP
Multicast host groups to learn IP Multicast group members

Active - Actively sending IGMP Query messages to solicit IP Multicast

group members

Concentration – For IGMP snooping operation in concentration VLAN

configuration (every port is VLAN grouped with some
common port and not VLAN grouped with the other ports.)

Select the new setting for the item from prompt screen and press Enter.
After completing the change, press Esc to leave.

Notes: GVRP Protocol
In addition to network management tools that allow network administrators to
statically add and delete VLAN member ports, the Intelligent Switch supports
GARP VLAN Registration Protocol (GVRP). GVRP supports the dynamic
registration of VLAN port members within a switch and across multiple
switches. In addition to dynamically updating registration entries within a
switch, GVRP is used to communicate VLAN registration information to other
VLAN-aware switches, so that members of a VLAN can cover a wide span
of switches in a network. GVRP allows both VLAN-aware workstations and
the Intelligent Switch to issue and revoke VLAN memberships. VLAN-aware
the Intelligent Switch register and propagate VLAN membership to all ports
that are part of the active topology of the VLAN.

«
...
42
43
44
45
46
...
»

Summary of Contents for KS-2300






















































































Reviews:

No comments

Related manuals for KS-2300

RackSwitch G8264

Brand: IBM Pages: 20

Flex System FC3171

Brand: IBM Pages: 64

Brand: Movie Vision Pages: 2

Brand: SMC Networks Pages: 2

Brand: Omega Engineering Pages: 8

TradeSwitch2-USB

Brand: G&D Pages: 88

SmartSwitch 2500

Brand: Cabletron Systems Pages: 402

Brand: 3Com Pages: 62

Elinx EIR510-2MC-T

Brand: B&B Electronics Pages: 107

Brand: HDTV Supply Pages: 15

kontron KSwitch D3 UM

Brand: S&T Pages: 38

LiteWave LS105G

Brand: TP-Link Pages: 3

velatia cgm.3 system

Brand: Ormazabal Pages: 76

Brand: Cabletron Systems Pages: 105

Brand: Edimax Pages: 8

TK-423K - USB/PS/2 KVM Switch

Brand: TRENDnet Pages: 14

Brand: FIBERROAD Pages: 30

SecureStack B2 B2G124-48P

Brand: Enterasys Pages: 91

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands