KTI KS-2300, User Manual

Page: 31 / 85

25
Notes:
1. The IP and its subnet setting of the switch are assigned based on VLAN.
2. This switch allows user to assign different IP subnet on different VLANs.
3. The RIP operation of the switch is for internal routing between the IP
subnet assigned on different VLANs. It is not a real L3 switch routing
operation.
4. For normal case, assign the switch’s IP address on the default VLAN for
remote management is OK.
5. If your want the switch to get IP from DHCP server please set “BOOTP”
item to DHCP.
u
ARP Table :
If you select ARP Table from the "IP Networking" screen, an ARP Table
screen appears with the ARP table entries that have been already defined or
learned.
You can add , delete and search static entries in the ARP table in the screen.
1). Adding static entries to the ARP table
a). From the ARP Table screen, hold down the Shift key and press +. The
Static ARP Specifications screen appears.
b). Highlight the Internet Address and press Enter. A "Enter Internet
Address" screen will appear.
c). Type an Internet address (IP address). When you finish, press Enter.
The Internet address you typed appears next to Internet Address in the
Static ARP Specifications screen.
d). Highlight the Physical Address and press Enter. A "Enter Physical
Address" screen will appear.
e). Type the corresponding physical address and press Enter. The
physical address you typed appears next to Physical Address in the
Static ARP Specifications screen.
f). Press Esc. The Internet and physical addresses you typed appear in the
ARP Table screen.
g). To add more static ARP table entries, repeat these steps. When you
finish, press Esc to return to the ARP Table screen.