KTI KS-2300 User Manual Download Page 47

Page: 47 / 85

Port Mirroring

Using

Port Mirroring

from the Advanced Management screen, you can

mirror one port to another port for network traffic monitoring. From the
Advanced Management screen, highlight

Port Mirroring

and press the

Enter key. The screen appears.

a). Highlight one index and press Enter. The screen will appear.
b). Highlight the “Mirror To” and press

Enter. Select the port that will be
mirrored to.

c). Highlight the "Mirror From" and press

Enter. Select the mirrored port from
the port list and press Enter.

d). Highlight the "Mirror Mode" and press Enter. Select the mirror mode

(Receive / Transmit) and press Enter. (You can mirror the receive or
transmit packets only but not both in the switch.)

Notes:

The mirror port number that you see in your console may be different

from the screen shown in the manual. Please do it according to the port
number shown on your screen.

Summary of Contents for KS-2300






















































































Search results

Summary of Contents for KS-2300

Reviews:

Related manuals for KS-2300

Brands by name

Popular brands

KTI KS-2300, User Manual

Search results

Summary of Contents for KS-2300

Reviews:

Related manuals for KS-2300

Brands by name

Popular brands