KTI KS-2300, User Manual

Page: 28 / 85

22
confirm screen to reset the counters. Or, select No to not reset them.
b). To view statistics for a port, highlight the desired port and press the
Enter key. A screen similar to the one appears, showing the statistics
for the port you selected.
c). To reset counters for the port in the screen above, press R. Then
select Yes in the confirm screen to reset the counters.
3). Per Port MAC Limit
You can configure Mac address learning function of each port to
1. Limited Learning, or
2. Unlimited Learning, or
3. No Learning
with this function for "Mac address limit"
application on port. If you select this function,
the screen will appear.
Then you highlight the port number and press
Enter. The following screen will appear.
a). Set Learning Limit : You can set a number to limit the PC number
that can share this connection at the same time.
b). Unlimited Learning : You can remove the PC connecting number
limit if you select this item. And the PC connecting number on the port
will become no limit. (It’s the normal state of a normal switch.)
c). No MAC Learning : You can disable the MAC learning function on
this port if you select this item. The MAC addresses that can connect
to this port will be assigned by the operator from the “Static Filtering”
function.
The "Set Learning Limit" function can set a limit on the number of PC that
can share this connection. The "No MAC Learning" function can set a
static Mac address table (manual assigned) to allow only these PC can
use this connection. This function allows the network administrator or
the service provider to limit the users that can access network through